|
Out House By using this tutorial you agree to my terms Feel free to use your own colors for this. For this tutorial you will need Jasc PSP 9 . This was written using 9 but it can be done in 8 and 7 with some adjustments. For those that are using my alpha channel canvas you can get it HERE For PSP7 users you wont be able to use the distress brush. So use the setting for the smudge 1. The smudge brush I use you can get SMUDGE BRUSH PRESETS AND BRUSHES PJ-Distress is one that I use a lot to make a textured like effect. Hairy brushes If you don't have them you can get the brushes HERE
Smudge 1
Air brush 1
Air brush 2
For
those
using
the
alpha
channel
canvas:
For
each step load alpha
channel selections,
then flood fill
with certain colors.
To keep from typing
the same thing for
each layer I will
just say the layer
we will be working
on. For most of
this I use the pj-distress smudge brush to make the
wood grain. After
you
have
flood
fill
the
layer
click on the lock Roof bottom: Flood fill with #231400 Building walls: Flood fill with first color on chart. Use 2nd and 3rd color and spray all over here and there. Use airbrush 1 settings. Change to colors 4th and 5th. Use airbrush 2 settings. Below is what I did. As you can see I have gone ahead and flood filled my layers to see better where I spray. It is your choice to do it or not. Smudge with the pj-distress brush. Add new layer and use the 4th color and spray some as in second screen shot. smudge again
Slat lines: Use the pen tool size 2 color black, Draw out the lines then convert to raster and gaussian blur 1. Trim: Do the same as walls. Adjust/brightness/contrast/ -20. Add new layer move it below trim layer. Use paint brush, color black paint on each side of middle part. Lower opacity so it looks like shading.
Door and window trim: Do the same as you did for the building walls. For the top and bottom of the window shade going left to right, for the sides go up and down. Change to paint brush size2. Paint some lines as in screen shot below. Apply drop shadow, vertical -1 and horizontal 1, opacity 100, blur 1 color black, shadow on new layer checked.
Slat lines for door: Do as you did for the building. Window screen: Use preset shape rectangle. Add new vector layer and move it below the window layer. Set foreground color to nil and background color to black. Make a rectangle just a little bit bigger than the hole in window. Convert to raster layer. Go to Effect/ texture effect/weave. Use these settings. Gap size: 1, Width: 1, opacity 65, weave color 808080, gap color black, Fill gaps checked.
Hinges and handle: Flood fill with #404040. Apply inner bevel metallic. Door trim 2: Flood fill with first color on chart. Airbrush the same as you did before. Smudge from left to right. Apply same drop shadow as window. Roof 2: Flood fill with 4th color on chart. Use 1st, 3rd and 5th colors for shading. Roof 3: Flood fill with black. Apply cutout vertical -1, horizontal -2, opacity 65, blur 2 and color white. On the right edge paint the white part black.
Load building alpha channel add new layer. Use paint brush solid color black. Paint as in screen shot below. Lower opacity to about 20 then gaussian blur 1.
That's all there is to your Outhouse.
Hope everyone had fun with this. Susi Click here to receive updates when new tutorials are posted.
If you need any help just ask.
(nospam)frozentush@yahoo.com do to all the spam robots I have had to change the e-mail just remove the (nospam) from my e-mail.
May 22, 2005 |
in the layer pallet.
